Estimates |
||
| If The Customer Wants An Estimate: | ||
| Estimates will be given only on jobs totaling over | $95.00 | |
| The customer must set a limit if they do not want to spend over **** this information must be written on the ticket. |
$95.00 | |
| Prepare Proposal for Damage for insurance purposes | $ 45.00 @ | |
Service Charges |
||
| Per Man Hour | $95.00 | |
| Per Man & Machine Hour | $150.00 | |
| Minimum Shop Charge | $35.00 | |
Clean & Lubricate |
||
| Shotguns, Rifles & Handguns | $70.00 | |
| Note: Any Gun With Excessive Rust | P.O.R. | |
Scope & Sight Work |
||
| Bore-sight – (Includes checking all screws for correct torque) | $20.00 | |
| Sight in firearm at Range (not including ammunition) | $150.00 | |
| Mount scope on rifle or handgun already drilled & tapped | $50.00 | |
| Drill & tap most rifles & handguns for scope | $95.00 | |
| Note: We prefer to mount the scope at the time we drill & tap and will do so at no additional charge. (Does not include bending bolt if needed) | ||
Rifle Work |
||
| Vias Quiet brake [includes parts & labor] (blue or stainless) | $285.00 | |
| Thread barrel for suppressor or muzzle brake | $195.00 | |
| Install Pinned Flash Suppressor | $150.00 | |
| Thread Bolt for Bolt Handle | $100.00 | |
| Re-barrel using customer supplied barrel | $580.00 | |
| Re-barrel with Douglas premium grade with standard contour | $750.00 [includes barrel] |
|
| For stainless add | $200.00 | |
| Note: Above barrel prices includes bluing barrel or bead blasting on Stainless. | ||
| Price does not include bluing action, bedding, or Sight work. | ||
| Check headspace | $50.00 | |
| Cut & crown barrel [does not include reinstallation of sight] | $120.00 | |
| Cut & crown barrel where necessary to remove from action | $175.00 | |
| Cut Dovetail for Sight | $ 90.00 & up | |
| Make chamber cast [to determine caliber or case dimensions] | $70.00 | |
| Note: we keep cast | ||
| Re-chamber barrel for larger cartridge | $200.00 | |
| Re-line .22 or .32 caliber barrel | $230.00 | |
| Remove stuck case from barrel | $85.00 | |
| Remove live round from chamber | $100.00 & up | |
| Alter bolt handle to clear scope | $150.00 | |
| Jewel Bolt | $150.00 | |
| Install Buehler safety, labor | $75.00 | |
| Adjustable triggers [not to be reduced below 3 pounds] | $70.00 | |
| Non-adjustable triggers [lever action, military, Ruger 77 | $ 85.00 & up | |
| Semi-autos [where possible] | $100.00 & up | |
Blueing |
||
| Handguns & long guns, matte finish | $185.00 & up | |
| Polished | $300.00 & up | |
Stock Work |
||
| Checkering & Custom Carving Services Available | POR | |
| Install sling swivels | $45.00 | |
| Fit pre-finished fiberglass stock & pillar bed | $300.00 | |
| Float barrel | $80.00 | |
| Glass bed action & float barrel | $185.00 | |
| Inlet semi-inletted stock [glass bedding extra] | $275.00 & up | |
| Inlet shape & finish semi-inletted stock | $550.00 & up | |
| Pillar bed & float | $200.00 | |
| Adjustable comb labor | $285.00 | |
| Hardware for adjustable comb | $100.00 | |
| Adjust comb by bending tang and re-inletting
Rem 1100, 870, & Winchester 12 |
$120.00 | |
| Adjust comb by bending wood where possible | $200.00 & up | |
Refinishing |
||
| Oil finish | $280.00 & up | |
| Note: for stocks with checkering add | $100.00 | |
| High gloss | Not Available | |
Recoil Pads |
||
| Install recoil pads | $85.00 | |
| High Grade Stocks | $100.00 | |
| (with Synthetic Stock where in insert must be added) | $120.00 | |
| Extra labor to install ¼” spacers | $ 30.00 @ | |
| Hardware for adjustable butt with pitch adjustment | $150.00 | |
| Install Adjustable butt plate [Timney] | $250.00 | |
| Shorten stock & re-install old pad (if pad can be reused) | $75.00 | |
Shotgun Work |
||
Sights |
||
| Drill & tap for front or center bead (labor only) | $55.00 | |
| Install Bead in existing hole with correct threads | $35.00 | |
Barrel Work |
||
| Cut & re-crown single barrel shotgun & re-install sight | $95.00 | |
| Cut & re-crown double barrel shotguns, fill in between barrels | ||
| with solder & re-install sight | $145.00 | |
| Lengthen forcing cone | $95.00 | |
| Open choke, per barrel | $85.00 | |
| Porting single barrel shotguns [in our shop] | $180.00 | |
| Porting over/under shotguns [in our shop] | $280.00 | |
| Ream & thread barrel for Nu-Line screw-in chokes (includes 3 chokes) |
$285.00 | |
| Shorten barrel at time of screw-in choke installation | $50.00 | |
| Re-chamber for longer shells (each barrel) | $95.00 | |
| Re-chamber or forcing cone job on chrome lined barrel | $145.00 | |
| Remove dents [at customer’s risk] | $100.00 & up | |
| Re-attach loose ribs on Win 101, Browning O/U and Daly O/U | $200.00 & up | |
| Note: Some discoloration of the bluing around the rib is likely. | ||
| Above price does not include re-bluing. | ||
| Straighten barrel [at customer’s risk] | $ 85.00 & up | |
Handgun Work |
||
Revolver Work |
||
| Chamfer breech of barrel [forcing cone] | $95.00 | |
| Install Night Sights | $50.00 | |
| XD & PX4 | $70.00 | |
| Front sight insert | $50.00 | |
| Re-time revolver, labor only | $100.00 & up | |
| Revolver triggers Lighten | $125.00 | |
| Revolver triggers [single action & double action pull] | $185.00 | |
| Straighten crane | $100.00 | |
| Stretch crane to remove end play on S&W | $100.00 | |
| Shorten barrel & re-install sight where possible | $295.00 | |
1911 Type Semi-Autos |
||
| Bobtail Housing install | $120.00 | |
| Fit Beavertail Safety [labor only] | $165.00 | |
| Fit Bushing | $100.00 | |
| Fit Grip Safety | $125.00 & up | |
| Fit New Barrel | $110.00 & up | |
| Fit New Safety | $50.00 | |
| Fit New Trigger | $50.00 | |
| Fit New Hammer | $125.00 | |
| Lower Ejection Port | $125.00 | |
| Machine Slide for Novak style sight – Front | $100.00 | |
| Tighten Slide | $175.00 | |
| Throat [polish feed ramp on barrel and frame] | $85.00 | |
| Trigger Job | $150.00 | |
AR15 Labor Charges |
||
| Barrel Change | $100.00 | |
| Buffer Spring Tube Change | $50.00 | |
| Build Lower | $95.00 | |
| Butt Stock Change | $15.00 | |
| Co Witness Optics / Laser | $40.00 | |
| Front Sight Change | $25.00 | |
| Gas Block | $60.00 | |
| Grip Change | $10.00 | |
| Muzzle Break / Adapter | $50.00 | |
| Install Pinned Muzzle Break / Adapter | $150.00 | |
| Quad Rail / Free Float Hand Guard | $85.00 | |
| Sling Adapter | $45.00 | |
| Trigger Install / Adjust | $60.00 | |
| Vertical Foregrip | $15.00 | |
Gun Koat Polymer Coating |
||
| Pistols | $200.00 | |
| Rifles | $220.00 | |
| Shotguns | $220.00 | |
| Note: Price includes Disassembly/Reassembly | ||
| Slide Only | $75.00 | |
| Frame Only | $95.00 | |
| 2 Tone / Slide Frame | $190.00 | |
| Magazine | $25.00 | |
| Bolt | $30.00 | |
| Rings & Bases | $25.00 | |
| Trigger Guard | $35.00 | |
| Accents | $50.00 | |
| Special order color not normally stocked | $35.00 | |
| Additional Colors | $ 15.00 Each Color | |
| Metal Repair due to rust/Pitting or other damage | $ 60.00 per hour | |
Camouflage Patterns |
||
| Per Layer | $40.00 | |
| Note: Due to the application process, normal minor defects can be present. | ||
| Every effort is made to keep this to a minimum | ||