Daniel Defense DDM4 V7 SLW 5.56mm Rifle, 14.5" - 02-201-05296-047
Daniel Defense DDM4 V7 SLW 5.56mm Rifle, 14.5" - 02-201-05296-047

Daniel Defense DDM4 V7 SLW 5.56mm Rifle, 14.5″ – 02-201-05296-047

Original price was: $2,250.00.Current price is: $2,093.00.

Available in Store Now: 5
Purchase in Store or over the phone at 210-342-5420

test

Daniel Defense DDM4 V7 SLW 5.56mm Rifle

The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length.

The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR 13.5 M-LOK handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity

.

Materials and Construction

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized.
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
GAS SYSTEM: Pinned Low Prole Gas Block CNC Machined of 4140 hardened steel and
Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
BOLT CARRIER GROUP: M16 Prole, Mil-Spec MP Tested, Chrome Lined, Properly Staked
Gas Key
HANDGUARD: Daniel Defense M-Lok13.5, CNC Machined of 6061-T6 Aluminum, M-LOK
Attachment, Type III Hard Coat Anodized
CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless
Steel Roll Pins, Type III Hard Coat Anodized.
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding

Daniel Defense DDM4 V7 SLW 5.56mm Rifle

  • FAMILY: Daniel Defense DDM4 Series
  •  MODEL: Daniel Defense DDM4 V7 SLW
  •  TYPE: Rifle
  •  ACTION: Semi-Auto
  •  FINISH: Black
  •  STOCK: Collapsible Daniel Defense
  •  CALIBER/GAUGE: 5.56mm
  •  STOCK/GRIPS: DD Furniture
  •  CAPACITY: 32+1
  •  BARREL: 14.5″ Pinned & Welded
  •  BARREL: 1/7 Twist
  •  SIGHTS: None
  •  ADDL INFO: Low Profile Gas Block
  •  ADDL INFO: 13.5″ M-Lok Rail
  •  ADDL INFO: Fully Ambidextrous Lower
  •  ADDL INFO: Dead Air Zeno Flash Hider
  •  ADDL INFO: Enhanced 3 Piece Trigger
  •  MFG MODEL NO: 02-201-05296-047
  •  REF:
  •  UPC: 818773024709
  •  Lifetime Warranty

Daniel Defense DDM4 V7 SLW 5.56mm Rifle

The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length.

The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR 13.5 M-LOK handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity

.

Materials and Construction

LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized.
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
GAS SYSTEM: Pinned Low Prole Gas Block CNC Machined of 4140 hardened steel and
Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
BOLT CARRIER GROUP: M16 Prole, Mil-Spec MP Tested, Chrome Lined, Properly Staked
Gas Key
HANDGUARD: Daniel Defense M-Lok13.5, CNC Machined of 6061-T6 Aluminum, M-LOK
Attachment, Type III Hard Coat Anodized
CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless
Steel Roll Pins, Type III Hard Coat Anodized.
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding